AV-278 Low Vis Hydro

Hydrophobic Polyurethane Grout

AV-278 Low Vis Hydro™ is a moisture-activated MDI-based polyurethane resin whose chemical reaction is catalyzed by mixing AV-279 Low Vis Accel™ with AV-278. Injected as a single component, AV-278 is low viscosity and designed with soil permeation in mind for penetrates with very high expansion to fill voids, stops active or potential water leaks, and stabilizes soils. AV-278 withstands wet/dry cycles, permeates well, and reacts with water to cure dense, closed-cell, impermeable and semi-rigid.

 

 

 

• Ground modification/slope stability for prevention of landslides, erosion, or any place where site conditions or project requirements dictate modification of the existing soil properties.
• Fills voids on the exterior of below-grade structures.
• Stops leaks in below-grade structures.

 

• • NSF/ANSI/CAN 61 Drinking Water Systems Component Certified.
  • Low viscosity allows for excellent permeation.
  • Free rise expands 4,000-6,000%.
  • Solvent-free.
  • Pumped as a single component.
  • Controllable reaction time by adjusting AV-279 volume.
  • Withstands wet/dry cycles.

 

AV-278 – UNCURED
Appearance: Brown resin
Viscosity: 25 – 100 cP @ 72°F (22°C)
Flash Point: 244.4°F (118°C)
Specific Gravity: 1.171 @ 72°F (22°C) ± 3%
Density: 9.77 lbs./gal. ± 3% (1,171 kg/m3 ± 3%)

AV-278 – CURED
Appearance: Milky colored, rigid
Compressive Strength: TBD
Toxicity: Non-toxic

AV-279 Low Vis Hydro Accel
Appearance: Light yellow liquid
Viscosity: 15-25 cP @ 72°F (22°C)
Flash Point: >200°F (>93°C)
Specific Gravity: 0.986 @ 72°F (22°C) ± 3%
Density: 8.23 lb./gal. ± 3% (986 kg/m3 ± 3%)
*Laboratory Results

 

• Drum – 484 lbs. (220 kg)
• Pail – 44 lbs. (20 kg)
• Gallon Container – 8 lbs. (3.6 kg)
• Dual Cartridge (Case of 6) –
  • AV-278 – 25.3 fl. oz (750 ml)
  • AV-279 – 2.5 fl. oz (75 ml)
• AV-279 Catalyst – 78 fl. oz. (2 kg)