MODIFIED NATURAL CELLULOSIC MATERIAL
QUIK-TROL LV modified natural cellulosic polymer can provide filtration control in most water-based drilling fluids without substantially increasing viscosity. QUIK-TROL LV modified natural cellulosic polymer when added to a QUIK-GEL or BORE-GEL slurry, yields a drilling mud system suitable for drilling in sandy formation. QUIK-TROL LV modified natural cellulosic polymer can be added to vegetable or mineral oil to provide an oil-based fluid suspension, which can be poured into drill string directly.
- NSF/ANSI Standard 60 certified
- Can reduce fluid loss without significantly increasing fluid viscosity
- Effective in fresh-, brackish-, and salt-water based drilling fluids
- Effective in small quantities for filtration control
- Non-fermenting and compatible with other Baroid drilling fluid additives
- Resistant to harsh environments and contaminants
APPLICATION
The use of QUIK-TROL LV polymer assists or promotes the following:
- Provide filtration control in fresh or brackish water-based drilling fluids
- Encapsulate shale to prevent swelling and disintegration
- Borehole stability in water sensitive formations
- Decrease rod chatter, rotational torque and circulating pressure
- Improve hole cleaning and core recovery
TYPICAL PROPERTIES
Appearance: White, free-flowing powder
pH (1% aqueous solution): 7.75
MIXING & HANDLING
Using a Venturi Mixer, or into vortex of a high-speed stirrer, add slowly and uniformly to the entire circulating system.
Approximate Amounts of QUIK-TROL LV cellulosic polymer Added to Water Based Fluids | ||
Added to fresh or salt water | lb/100 gal | kg/m³ |
To help stabilize water sensitive formation
To help reduce torque and lower circulating pressure |
3-7
0.5-2 |
4-8.5
0.6-2.4 |
Added to QUIK-GEL slurry (25 lb/100 gallons) or (30 kilograms per m³) | lb/100 gal | kg/m³ |
To help reduce filtration rate and improve borehole stability | 0.5-2.0 | 0.6-2.4 |
Added to BORE-GEL slurry (35 lb/100 gallons) or (42 kilograms per m³) | lb/100 gal | kg/m³ |
To help reduce filtration rate and improve borehole stability | 0.5-2.0 | 0.6-2.4 |
Note: Very salty waters may require twice as much QUIK-TROL LV cellulosic polymer as fresh water. Preferably, QUIK-TROL LV cellulosic polymer should be mixed in fresh water before it is added to very salty water.
PACKAGING & CONTROLS
QUIK-TROL LV cellulosic polymer is packaged in a 20-lb plastic can containing 10 airtight sealed plastic bags. Each bag contains 2-lb (0.91 kg). QUIK-TROL LV polymer is also available in 40-lb plastic cans.