Properties Appearance: Clear LiquidViscosity: 5 cP @ 68°F (20°C)Flash Point: >212°F (>100°C)pH: 7.5 – 8.5Specific Gravity: 1.095 @ 68/39.8°F (20/4.3°C)Water Solubility: +/- 3.5% Packaging & Controls […]
AV 284 Pump Wash
Archives: Products
Silica Sand
Well Sand
AQF 2
Application The use of AQF-2 foaming agent promotes or assists with the following: Mixing & Handling Approximate Amounts of AQF-2 Foaming Agent Added to Injection Water % by Volume Amount/100 gal Amount/bbl Liters m³ 0.5 – 2 0.5 – 2 gallons 0.85-3.4 quarts 5 – 20 Approximate Product Make-ups for Air Drilling Injection Slurries Injection […]
Quik Foam
Application The use of QUIK-FOAM foamer assists or promotes the following: Typical Properties Appearance: Light yellow, transparent liquidSpecific Gravity: 1.02pH (0.5% solution): 7.1Flash point, PMCC: 82°F (28°C)Pour Point: 0°F (-18°C) Mixing & Handling Approximate Amounts of QUIK-FOAM Added to Injection Water *In drill pipe, followed by 3 to 5 gallons of water; **Followed by 20 liters of water Note: Close product […]
Aquaguard
One-Sack Borehole Grouting Material AQUAGUARD is a single-sack grout containing granular Wyoming sodium bentonite blended with inorganic additives. The grout is designed for sealing the annular space around monitor or water well casing. Application The use of AQUAGUARD grouting material assists or promotes the following: AQUAGUARD grouting material is not recommended for use as a […]
AV 278 Low Vis Hydro
Applications Features & Benefits Properties AV-278 – UNCUREDAppearance: Brown resinViscosity: 25 – 100 cP @ 72°F (22°C)Flash Point: 244.4°F (118°C)Specific Gravity: 1.171 @ 72°F (22°C) ± 3%Density: 9.77 lbs./gal. ± 3% (1,171 kg/m3 ± 3%) AV-278 – CUREDAppearance: Milky colored, rigidCompressive Strength: TBDToxicity: Non-toxic AV-279 Low Vis Hydro AccelAppearance: Light yellow liquidViscosity: 15-25 cP @ […]
AV 202 Multigrout
Applications Features & Benefits Properties UNCUREDAppearance: Brown resinViscosity: 3,200 – 6,000 cP @ 77°F (25°C)Flash Point: 253.4°F (123°C)Specific Gravity: 1.090 @ 72°F (22°C) ± 3%Density: 9.09 lbs. per gallon ± 3% (1.090 kg/L ± 3%) CUREDAppearance: Milky colored, flexibleTensile Strength: TBDElongation: TBD Packaging & Controls […]
EZ Seal
One Sack Grouting and Plugging Material EZ-SEAL one-sack granular bentonite product is intended for use as an easily mixed grouting and plugging material. Application The use if EZ-SEAL bentonite assists or promotes the following: Typical Properties Appearance: Bluish-tan granulesVolume, ft³/sack: 0.70Thermal conductivity, btu/hr ft °F (watts/meter °C): 0.41 (0.70) Mixing & Handling Add one 50-lb (22.7 kg) sack […]
Quik Grout
Application Typical Properties Appearance: Beige to tan granulesSpecific Gravity: 2.6pH (8% slurry): 8.2Electrical Resistivity: 0.98 ohm-meterYield Volume: 26.3 gallons per 50lb sack / 99.5 liters per 23kg sack Mixing & Handling For maximum results, pre-treat make-up water with Soda Ash to less than or equal to 100 mg/l total hardness and to a pH range of 8.5 – 9.5. The […]
