Application Typical Properties Appearance: straw colored liquidSpecific gravity: 1.2 to 1.4pH (neat): 6.5 to 7.5 Mixing & Handling As a Well Development Aid As a Mud Thinner Start by adding one pint of AQUA-CLEAR PFD to 500 gallons of mud. Increase concentration until desired viscosity is achieved. Well Capacity Chart (Gallons per Foot) Well Capacity Chart (Liters per Meter) […]
Typical Properties Appearance: Forest Green LiquidSpecific Gravity: 0.98pH (1%) solution: 9.5Flash Point, TOC, °F, °C: >300, (149) Mixing & Handling Added uniformly through entire circulation system As a slug down drill rods to counteract the sticking tendencies of clay Alternate application Packaging & Controls PENETROL wetting agent is packaged in 5-gal (19-liter) plastic containers. […]
Typical Properties Appearance: Clear red liquidSpecific gravity: 1.03pH (1% solution): 8.9Flash point, PMCC: 210°F (99°C)Pour Point: 28°F (-2.2°C) Mixing & Handling Approximate Amounts of CON DET Wetting Agent Added to Water Packaging & Controls CON DET wetting agent is packaged in 5-gal (19-liters) plastic containers. […]
Blasthole Stabilizer A unique cost-saving fluid formulated to speed-up hole-collaring, reduce collar sloughing and stabilize the total blasthole. HOLE CONTROL can be used with air-rotary tri-cone, downhole hammers and all types of top hammer drills (surface and underground). CONTROL CHEMICAL CAN MODIFY THE FORMULA TO FIT ANY MINE’S DRILLING CONDITIONS AND PROVIDE START-UP AND TECHNICAL […]
Application The use of EZ-MUD PLUS polymer assists or promotes the following: Typical Properties Appearance: Thick opaque white liquidDensity: 8.3 lbs/gal (1.00 g/cm³)Flash Point, PMCC °F, °C: >200 (>93.3)Thermal Stability, °F, °C: 250 (121) Mixing & Handling Approximate Amounts of EZ-MUD® PLUS High Molecular Weight Polymer Emulsion Added to Water Based Fluids Pints/bbl* Quarts/100 gal Liters/m³ 0.5 – 1.8 […]
Clay/Shale Stabilizer EZ-MUD GOLD clay and shale stabilizer provides inhibition of clay and shale formations in water-based drilling fluids without substantially increasing viscosity. EZ-MUD GOLD stabilizer, when added to a QUIK-GEL or BORE-GEL slurry, yields an inhibitive drilling fluid system while maintaining manageable and effective fluid properties. EZ-MUD GOLD stabilizer can be mixed easily at […]
Application Typical Properties Appearance: Off-white, free-flowing, viscous fluidSpecific gravity: 0.98pH (0.3% solution): 9.0Flash Point, PMCC °F, °C: 185, (85)Pour Point, °F (°C): 35, (1.7)Freeze Point, °F (°C): -40, (-40) Mixing & Handling Using Venturi Mixer, or into vortex of a high-speed stirrer, add slowly and uniformly to entire circulating system. Used to slug down the rods to produce a high viscosity […]
Application The use of POLY-BORE dry polymer assists or promotes the following: Typical Properties Appearance: White granularBulk density, lb/ft³: 52pH (0.25% solution): 8.5 to 9.0 Mixing & Handling Construction Applications Flooded Reverse Circulation Drilling General Instructions Notes Packaging & Controls POLY-BORE dry polymer is packaged in 14 lb (6.35-kg) or 35 lb (15.88- kg) resealable plastic containers. […]
Application Typical Properties Appearance: White, free-flowing powderpH (1% aqueous solution): 8.0 Mixing & Handling Using a Venturi Mixer, or into vortex of a high-speed stirrer, add slowly and uniformly to the entire circulating system. Note: Very salty waters may require twice as much QUIK-TROL polymer or filtration control additive as fresh water. Preferably, QUIK-TROL polymer or filtration […]
Application The use of QUIK-TROL LV polymer assists or promotes the following: Typical Properties Appearance: White, free-flowing powderpH (1% aqueous solution): 7.75 Mixing & Handling Using a Venturi Mixer, or into vortex of a high-speed stirrer, add slowly and uniformly to the entire circulating system. Approximate Amounts of QUIK-TROL LV cellulosic polymer Added to Water Based Fluids […]
Get in Touch
Contact us to request a quote or learn more about how our drilling tools, supplies, and fluids can support your success. Please fill out the form, and we will connect you with one of our knowledgeable staff members.
"*" indicates required fields
2190 Last Chance Road
Elko, NV 89801
Phone: 775.424.3045
Email: info@jentechdrillingsupply.com
Website: www.jentechdrillingsupply.com
Jentech Drilling Supply Inc is a division of Di-Corp that services the Groundwater, Mining, and Mineral Exploration industries throughout the USA. We specialize in helping our customers implement drill systems from the “top head to bit”, carrying a full line of drilling products from the top manufacturers in the world.
Copyright © Jentech Drilling Supplies - All Rights Reserved.