Application Typical Properties Appearance: Beige to tan granulesSpecific Gravity: 2.6pH (8% slurry): 8.2Electrical Resistivity: 0.98 ohm-meterYield Volume: 26.3 gallons per 50lb sack / 99.5 liters per 23kg sack Mixing & Handling For maximum results, pre-treat make-up water with Soda Ash to less than or equal to 100 mg/l total hardness and to a pH range of 8.5 – 9.5. The […]
Application Mixing & Handling Store in sealed bags only. Partially used, open bags will take on ambient moisture. Product should be stored in a covered, dry area to avoid exposure to moisture. There are no specific ambient temperature restrictions for storage, however, sudden dramatic changes in temperature that may promote moisture condensation should be strictly […]
Application The use of QUIK-GEL viscosifier promotes or assists the following: Typical Properties Appearance: Grey to tan powderBulk density, lb/ft³: 68 to 72 (compacted)pH (3% solution): 8.9 Mixing & Handling Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer. Approximate Amounts of QUIK-GEL viscosifier Added to Freshwater Note: 1 bbl = 42 […]
Application The use of BENSEAL and EZ-MUD slurry assists or promotes the following: Typical Properties Slurry weight: 9.5 lb/gal (1.14 g/cm³)Total active solids: 20% by weightYield volume: 26.3 gal (0.1 m³) per 50-lb (23-kg) bag of BENSEAL bentoniteThermal conductivity: 0.43 btu/hour·ft·°F (0.74 watts/meter°C) Recommended Treatment Effective use of BENSEAL and EZ-MUD slurry requires the use of specific equipment capable […]
Typical Properties Appearance: Variable-colored, free-flowing powderSpecific gravity: 4.2 (minimum)Moisture content: Less than 1%Bulk density, lb/ft³: 150 >94%Mineralogical component: barium sulfate (containing no free barium ion) Mixing & Handling Before adding BAROID weighting material, the Marsh Funnel viscosity (sec/qt) of the circulating fluid should be increased to four times the desired final weight by the addition of AQUAGEL viscosifier or QUIK-GEL […]
Typical Properties Appearance: Bluish to gray granulesDry screen analysis: 85% as 8 meshVolume, ft³ /sack: 0.7 (as packaged)Specific gravity: 2.6 Mixing & Handling As a casing drill and drive operation: Note: When drilling and driving a 4″ (102mm) pipe, expect to use 2.5 pounds of BENSEAL sealing and plugging agent per foot of hole or 3.7 kilograms per meter […]
Halco Rock Tools design and manufacture to exacting standards, Halco DTH hammers deliver outstanding performance, productivity and longevity. Customers also enjoy the versatility and variety, allowing the use of Halco DTH hammers on a wide range of rock-drilling applications. All Halco drill bits have superb performance and benefit from a long life span. Halco 6 Overview […]
Get in Touch
Contact us to request a quote or learn more about how our drilling tools, supplies, and fluids can support your success. Please fill out the form, and we will connect you with one of our knowledgeable staff members.
"*" indicates required fields
2190 Last Chance Road
Elko, NV 89801
Phone: 775.424.3045
Email: info@jentechdrillingsupply.com
Website: www.jentechdrillingsupply.com
Jentech Drilling Supply Inc is a division of Di-Corp that services the Groundwater, Mining, and Mineral Exploration industries throughout the USA. We specialize in helping our customers implement drill systems from the “top head to bit”, carrying a full line of drilling products from the top manufacturers in the world.
Copyright © Jentech Drilling Supplies - All Rights Reserved.