R™ Reverse Flank Wireline Drill Rod
Manufactured to the highest standards of quality and precision, Di-Corp offers a reverse-flank threaded wireline drill rod solution (R™) in Standard and LITE that improves your bottom line and increases your competitiveness.
Each stage of the process, from material selection to manufacturing, packaging and handling, is controlled and supported by an experienced team of professionals, so you can be confident that every rod that leaves our factory will perform to your expectations.
As with all Di-Corp drill rods, our Reverse Flank R™ Drill Rod has been engineered for maximum strength with greater torsional and tensile strength than competing options. Here are some additional benefits of our drill rods:
- Drills deeper and lasts longer
- Increases depth capacity and prevents drilling fluid loss
Di-Corp uses an environmentally friendly thread compound to reduce friction, allowing for the proper makeup of the joint with less torque and reduced thread wear and galling.
- Every rod is factory coated with this compound on the box and pin ends
- The use of this compound is MANDATORY for the initial makeup of the joint
Download the Drillers Edge Coring Rods brochure
| Part Number | Description |
|---|---|
| 904961 | DRILL ROD, BR 3m |
| 104962 | DRILL ROD, BR 1.5m |
| 104963 | DRILL ROD, BR 10ft |
| 104964 | DRILL ROD, BR 5ft |
| 904111 | DRILL ROD, NR 3m |
| 104113 | DRILL ROD, NR 1.5m |
| 904112 | DRILL ROD, NR 10ft |
| 104114 | DRILL ROD, NR 5ft |
| 104264 | DRILL ROD, NR 3m LITE |
| 104263 | DRILL ROD, NR 10ft LITE |
| 904252 | DRILL ROD, HR 3m |
| 104253 | DRILL ROD, HR 1.5m |
| 902450 | DRILL ROD, HR 10ft |
| 104251 | DRILL ROD, HR 5ft |
| 104265 | DRILL ROD, HR 3m LITE |
| 104206 | DRILL ROD, HR 10ft LITE |
| Size and Thread | Depth Capacity* |
|---|---|
| BR | >2500 m (8205 ft) |
| NR | >3000 m (9842 ft) |
| NR LITE | >3500 m (11,482 ft) |
| HR | >2500 m (8205 ft) |
| HR LITE | >3000 m (9842 ft) |
*Depth capacity ratings are based on published industry values. Di-Corp uses comparable materials and manufacturing processes and is confident the same results will be achieved. It is important to note that the care and handling, in addition to drilling conditions, practices, and equipment, will play a significant role in the ultimate depth capacity and performance of any drill rod.
**Di-Corp tests its rod offering at an independent facility. Pullback is rated on a new, unused drill rod.
Each stage of the process, from material selection to manufacturing, packaging and handling, is controlled and supported by an experienced team of professionals, so you can be confident that every rod that leaves our factory will perform to your expectations.
- Engineered to precise tolerances for maximum strength
HIGH-QUALITY MATERIALS
- Steel is specified to the highest industry standards.
- Processed with an additional stress relief heat treatment to eliminate bent rods.
- Finished with a specialty hardening process that is continuously monitored and adjusted to each batch of material to ensure consistency.
PRECISION MACHINED THREADS
- Pin threads are precision machined in our state-of-the-art manufacturing facility by industry-experienced professionals.
- Unparalleled quality control in-house ensures consistent quality of finished product
WARNING: All threads are precision machined. Mixing Di-Corp rods with other manufacturers’ rods, adaptors, or threaded accessories is not recommended. Failure to adhere to this recommendation may cause premature failure; an inspection may result in the warranty becoming void.
- Pin ends are stamped with a code for easy traceability
- ‘R’ wireline drill rods have one identifying groove behind the pin end
- End cap decals are used to identify the product once packaged for shipping
- All rods are packaged and sold in bundles
- The entire length of the rod is coated with Krown rust protection oil
- Box and pin ends are protected with plastic end caps to ensure the anti-galling thread compound does not get contaminated or removed before the first use
- Hexagonal bundle end caps further protect the rod ends during shipping and make them easier to stack
