Quik Gel
QUIK-GEL viscosifier is an easy-to-mix, finely ground (200-mesh), premium-grade, high-yielding Wyoming sodium bentonite. QUIK-GEL viscosifier imparts viscosity, fluid loss control and gelling characteristics to freshwater-based drilling fluids.
- NSF/ANSI Standard 60 certified
- Single-sack product and cost effective
- Can provide lubricity for drilling fluids
- Can mix easily and quickly reaches maximum viscosity
- Can yield more than twice as much mud of the same viscosity as an equal weight of API oilfield grades of bentonite
Application
The use of QUIK-GEL viscosifier promotes or assists the following:
- Mix with fresh water to form a low-solids drilling fluid for general drilling applications
- Viscosify water-based drilling fluids
- Reduce filtration by forming a thin filter cake with low permeability
- Improve hole-cleaning capability of drilling fluids
- Mix with foaming agents to make “gel/foam” drilling fluids for air/foam drilling applications
Typical Properties
Appearance: Grey to tan powder
Bulk density, lb/ft³: 68 to 72 (compacted)
pH (3% solution): 8.9
Mixing & Handling
Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
Approximate Amounts of QUIK-GEL viscosifier Added to Freshwater
| Application/Desired Result | lb/100 gal | lb/bbl | kg/m³ |
|---|---|---|---|
| Normal Drilling Conditions | 15 – 25 | 6 – 10 | 18 – 30 |
| Unconsolidated Formations | 35 – 50 | 15 – 21 | 42 – 60 |
| Make-Up For Gel/Foam Systems | 12 – 15 | 5 – 7 | 14 – 18 |
Note: 1 bbl = 42 U.S. gallons
For optimum yield, pre-treat make-up water with 1-2 pounds of soda ash per 100 gallons of water (1.2-2.4 kg/m³).
Packaging & Controls
QUIK-GEL viscosifier is packaged in 50-lb (22.7-kg) multiwall paper bags.
Add to Quote
