Petol Friction Tongs With Chain
PETOL FRICTION TONGS WITH CHAIN were designed especially for holding and turning pipe that must be carefully protected. The tongs have no bits or teeth inserts to mar the surface and therefore must turn the pipe by friction alone. The tongs are easily applied and removed and cannot jam or bind. Perfect ratcheting action and efficient performance are assured. When ordering, make sure to specify the exact O.D. on which the tongs are to be used.
Available Sizes
| Catalog No. | O.D. | Gripping Width | Handle Length | Weight | Maximum Working Load |
|---|---|---|---|---|---|
| FA3:3.000 | 3.000″ | 4.31″ | 51″ | 50lbs | 10,000 ft-lbs |
| FA3:3.125 | 3.125″ | 4.31“ | 51″ | 50lbs | 10,000 ft-lbs |
| FA3:3.250 | 3.250″ | 4.31“ | 51″ | 50lbs | 10,000 ft-lbs |
| FA3:3.500 | 3.500″ | 4.31“ | 51″ | 50lbs | 10,000 ft-lbs |
| FA3:3.625 | 3.625″ | 4.31“ | 51″ | 50lbs | 10,000 ft-lbs |
| FA3:3.750 | 3.750″ | 4.31“ | 51″ | 50lbs | 10,000 ft-lbs |
| FA3:4.000 | 4.000″ | 4.31“ | 51″ | 50lbs | 10,000 ft-lbs |
| FA4:4.000 | 4.000″ | 4.31“ | 46″ | 54lbs | 12,500 ft-lbs |
| FA4:4.125 | 4.125″ | 4.31“ | 46″ | 54lbs | 12,500 ft-lbs |
| FA4:4.250 | 4.250″ | 4.31“ | 46″ | 54lbs | 12,500 ft-lbs |
| FA4:4.500 | 4.500″ | 4.31“ | 46″ | 54lbs | 12,500 ft-lbs |
| FA4:4.750 | 4.750″ | 4.31“ | 46″ | 54lbs | 12,500 ft-lbs |
| FA4:5.000 | 5.000″ | 4.31“ | 46″ | 54lbs | 12,500 ft-lbs |
| FA4:5.375 | 5.375″ | 4.31“ | 46″ | 54lbs | 12,500 ft-lbs |
| FAS4:4.000 | 4.000″ | 4.31“ | 28″ | 45lbs | 12,500 ft-lbs |
| FAS4:4.125 | 4.125″ | 4.31“ | 28″ | 45lbs | 12,500 ft-lbs |
| FAS4:4.250 | 4.250″ | 4.31“ | 28″ | 45lbs | 12,500 ft-lbs |
| FAS4:4.500 | 4.500″ | 4.31“ | 28″ | 45lbs | 12,500 ft-lbs |
| FAS4:4.750 | 4.750″ | 4.31“ | 28″ | 45lbs | 12,500 ft-lbs |
| FAS4:5.000 | 5.000″ | 4.31“ | 28″ | 45lbs | 12,500 ft-lbs |
| FAS4:5.375 | 5.375″ | 4.31“ | 28″ | 45lbs | 12,500 ft-lbs |
Special O.D. sizes available upon request. Special sizes are non-returnable.
WARNING: Do not exceed maximum working load. Overloading may result in injury or death. Always use a load cell or other calibrated indicating device to monitor the line pull on the tong to avoid overload. Read Safe Practices & Procedures Manual prior to operation. Follow OSHA, NSC, etc. standards, safe practices, and procedures.
Add to Quote
