PETOL Friction Tongs with Chain

PETOL FRICTION TONGS WITH CHAIN were designed especially for holding and turning pipe that must be carefully protected. The tongs have no bits or teeth inserts to mar the surface and therefore must turn the pipe by friction alone. The tongs are easily applied and removed and cannot jam or bind. Perfect ratcheting action and efficient performance are assured. When ordering, make sure to specify the exact O.D. on which the tongs are to be used.

 

AVAILABLE SIZES

Catalog No.  O.D.  Gripping Width  Handle Length  Weight  Maximum Working Load
FA3:3.000 3.000″ 4.31″ 51″ 50lbs 10,000 ft-lbs
FA3:3.125 3.125″ 4.31 51″ 50lbs 10,000 ft-lbs
FA3:3.250 3.250″ 4.31 51″ 50lbs 10,000 ft-lbs
FA3:3.500 3.500″ 4.31 51″ 50lbs 10,000 ft-lbs
FA3:3.625 3.625″ 4.31 51″ 50lbs 10,000 ft-lbs
FA3:3.750 3.750″ 4.31 51″ 50lbs 10,000 ft-lbs
FA3:4.000 4.000″ 4.31 51″ 50lbs 10,000 ft-lbs
FA4:4.000 4.000″ 4.31 46″ 54lbs 12,500 ft-lbs
FA4:4.125 4.125″ 4.31 46″ 54lbs 12,500 ft-lbs
FA4:4.250 4.250″ 4.31 46″ 54lbs 12,500 ft-lbs
FA4:4.500 4.500″ 4.31 46″ 54lbs 12,500 ft-lbs
FA4:4.750 4.750″ 4.31 46″ 54lbs 12,500 ft-lbs
FA4:5.000 5.000″ 4.31 46″ 54lbs 12,500 ft-lbs
FA4:5.375 5.375″ 4.31 46″ 54lbs 12,500 ft-lbs
FAS4:4.000 4.000″ 4.31 28″ 45lbs 12,500 ft-lbs
FAS4:4.125 4.125″ 4.31 28″ 45lbs 12,500 ft-lbs
FAS4:4.250 4.250″ 4.31 28″ 45lbs 12,500 ft-lbs
FAS4:4.500 4.500″ 4.31 28″ 45lbs 12,500 ft-lbs
FAS4:4.750 4.750″ 4.31 28″ 45lbs 12,500 ft-lbs
FAS4:5.000 5.000″ 4.31 28″ 45lbs 12,500 ft-lbs
FAS4:5.375 5.375″ 4.31 28″ 45lbs 12,500 ft-lbs
Special O.D. sizes available upon request. Special sizes are non-returnable.

 

WARNING: Do not exceed maximum working load. Overloading may result in injury or death. Always use a load cell or other calibrated indicating device to monitor the line pull on the tong to avoid overload. Read Safe Practices & Procedures Manual prior to operation. Follow OSHA, NSC, etc. standards, safe practices, and procedures.